Optical Measuring

Non-contact measuring solutions for process control and inspection

  • Baty SM350 - Profile Projector
    This vertical 350mm / 14" screen bench projector features a large, heavy duty high precision workstage with 250mm x 125mm measuring range and 0.5 micron resolution. Another feature is the option of a three lens turret for instant lens changes without re-calibration.
    View Product
  • Trimos TR-Scan 2D
    Trimos has drawn on its vast experience in metrology to develop a fresh perspective for contactless measurement. The extremely stable mechanism enables contactless measurements down to a few nanometres. The simple optical coupling system allows a quick change of measuring range, with a wide range of sensors to meet the measurement needs of the customer. The system is driven by the Trimos measurement software, Nanoware, which allows any type of 2D mode measurement. The integration of “vertical patching” (stitching) enables the system to exceed the measuring range of the sensor. Macros can be created in the Nanoware software to enable an entirely automatic measurement with integration to component pallets from a production line environment. The software analysis program can produce log sheets that are used in accordance with current roughness standards, such as Ra, Rz, Rq etc. It is also possible to transform the profile into a contour analysis by using the contour option. The main features include: • Simplicity of use for multiple operator usage • Contactless surface measurement • Results are comparable to conventional methods • Nanometric resolution • Large vertical measuring range • 90x90 mm scope of application • Extremely stable cast-iron base • Completely CNC-controlled • Rigid X-Y table • Parts weight capacity up to 20kg For a detailed quote based on your requirements, please contact us on sales@bowersgroup.co.uk.
    View Product
  • Sylvac Scan S25T
    The all new Sylvac-Scan S25T, the latest addition to optical measuring systems from Sylvac. Using the latest Sylvac-Scan technology, this high resolution, high accuracy machine is ideal for rapid measurement of small cylindrical parts up to 26mm diameter and 200mn in length, such as, watch parts, dental implants, bone-screws, automotive, aerospace and general cylindrical parts where inspection time and accuracy matters. Small yet powerful, the Sylvac-Scan S25T comes equipped with Sylvac’s renowned tilt axis, for comprehensive thread measurement, capable of measuring threads with helix angles up to 30°. Delivered automation ready, with a motorised tailstock for automated clamping, quick release tooling, external I/O connectivity and communication protocols. Easy to use, with an all new operator touch screen interface panel, offering intuitive operation directly on the shop floor, with one click automatic measurement and part recognition. • High resolution and high accuracy <1µm diameters / <3µm length • Moving optics with tilt 0-30° for comprehensive thread measurement • Scan speed 60mm/s, move 100mm/s, • Full 2D scan of part in 4 seconds! • High resolution rotary axis 0.0003º • Compact design W450 x D520 x H590mm (desktop) • Easy to use yet powerful Reflex-Scan+ software • New touch pad operator control panel for ease of use on the shop floor (In addition to standard PC) • New custom thread wizard software • Automation ready, motorised tailstock, I/O connectivity and pneumatic preparation • Quick release tooling with ISO MT2 adaptor • Dynamic LED status bar (classification, status & tailstock force) A NEW touch pad operator control panel, enhancing the ease of use for operators directly on the shop floor. The touch pad can be used to, measure parts, review results, print and make programs with Reflex-Click auto measure. No need for operators to interact with the mouse and keyboard of the main PC. NEW Sylvac-Scan S25T Benefits • Reduce inspection time • Reduce CNC downtime • Reduce investment for control • Reduce scrappage • Increase inspection frequency • Improve process control capabilities • Instant report generated by one machine • Use directly on the shopfloor • Avoid QC bottle necks • No specialist training required to operate • SAVE COSTS
    View Product
  • Baty SM300 - Profile Projector
    300mm screen vertical light path projector with multi-function readout unit and printer. Robust design with full geometric measuring functionality ideal for the shop floor.
    View Product
  • INNOVATEST Brinell BIOS Scan
    The Innovatest BIOS Brinell is a handheld optical scanner that can be connected to a standard laptop, tablet or any other device running a Windows 10 operating system. Different materials have different finishes; for Brinell fast light adjustment is mandatory. The scroll wheel provides an ultra-fast way of experimenting with light settings to get the correct one; this is then stored for the current application. The BIOS™ has a camera and electronics that are built around a telecentric lens, with an adjustable direct LED light module that illuminates the shadow areas around the indents. This creates a high-resolution image for fast and repeatable measurement. The telecentric lens allows for the highest possible accuracy to be obtained time and again. No special skills are required to operate the BIOS, making this an easy tool for any operator to utilise. The Innovatest Bios system is designed to make the daily testing of Brinell indents faster, more accurate and reliable. Data can be saved in a CSV file, for a simple import to MS applications such as Word and Excel for further analysis or reporting.
    View Product
  • Sylvac Scan S145 and S145L
    The Sylvac Scan S145 has been developed as an optical measuring centre, to measure mid to large size cylindrical parts up to 145mm diameter and 1280mm in length. The S145 offers fast, accurate and repeatable measurements equipped with quick release tooling and motorised tailstock, making this the ideal solution for full automation. The Sylvac Scan 145 can be located easily on the shop floor with integrated temperature sensors and on-board calibration master to ensure optimum performance.
    View Product
  • Baty Vision Systems - VuMaster
    The BATY VuMaster is a 2D vision system with a massive difference. Due to its innovative absolute 2D scale system, the newly designed VuMaster does not have a conventional moving stage or encoders - just a floating measuring camera that moves anywhere in the measuring range. The result is fast, accurate, ‘non contact’ measurement over a much larger measuring range - 400mm x 300mm. Because the camera moves and the part stays still, there is often no need for expensive and time consuming work holding devices. VuMaster is either operated manually or inspection routines can be recorded and stored. When played back, these ‘programs’ either run automatically, (CNC). or guide the operator through a pre-defined inspection procedure recreating the same lighting conditions and using ‘Video Edge Detection’ to automatically ’capture’ feature data. Finally, a report is generated in the form of a fully dimensioned drawing of the measured part.
    View Product
  • Baty Vision Systems - Venture XT CNC
    The Venture XT- CNC has Fusion 3D software, a 300mm x 300mm x 200mm XYZ stage and includes a controller and 2 x 19 inch monitors. Venture CNC models take the power of fusion software one stage further by completely automating the inspection process. Now advanced features like scanning and best fitting can be done quickly without taking up the time of skilled operators. CNC programming is a simple teach and repeat process. Just measure the part once and a full CNC program is created automatically. The zoom lens can also be controlled so that magnification and auto focus changes are all recorded into the program. CNC Functionality The use of a touch probe is optimised on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using video edge detection for optimum speed and reduced inspection times. A probe changer rack can be installed so that probe modules fitted with a variety of pre-calibrated styli can also be used in the same inspection. When a change of stylus is required, the system automatically puts the current probe module back in the rack and picks up the next to continue the inspection process. When programming using the touch probe, use only the minimum points required to define each element. Then simply edit in the optimum number of points for each element. The new probe path is then automatically created when the program is played, cutting down both programming and inspection time. Alternatively, features can be programmed directly from an imported 3D CAD model. FREE RENISHAW TOOLCHANGER WORTH £1,684 WITH A MACHINE PURCHASE, VALID UNTIL 30/06/21.
    View Product
  • Sylvac Scan F60 Range
    The Sylvac Scan F60 has been designed to measure the most demanding of cylindrical parts. With a brand new camera and optics, the F60 range offers superior image processing with fast inspection times. The Sylvac Scan F60 range is designed for use on the shop floor with a new enclosure including a door and safety curtain, integrated calibration master, temperature sensors and LED status light. The F60 uses the renowned Reflex One Click technology offering part recognition and auto measure, all with one button click. Quick release tooling for making rapid part change overs, combined with sophisticated software giving immediate visual results, assist in providing essential efficiencies in a busy working environment.
    View Product
  • Baty Vision Systems - Venture Plus
    The Venture Plus range includes all of the standard Venture features with a little more... measuring range, that is.
    View Product
  • Baty R14 - Profile Projector
    The Baty R14 bench mount profile projector with its 340mm screen combines high accuracy non-contact measurement and inspection with a large 175mm x 100mm measuring range. Choice of digital readouts and optional automatic profile edge detection ensures that you can have the projector that fits your requirements. The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture family. The compact and robust lightweight chassis makes the R14 ideal for workshop environments.
    View Product
  • Baty R400 - Profile Projector
    The Baty R400 bench mount profile projector with its 400mm screen combines high accuracy non-contact measurement and inspection with a large 300mm x 150mm measuring range. Choice of digital readouts and optional automatic profile edge detection ensures that you can have the projector that fits your requirements. The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture family. The robust design of the R400 makes it suitable for both the shop floor and the standards room.
    View Product
  • Baty R600
    The Baty R600 with its 600mm (24") screen and high specification presents the capability to make simple comparative non-contact measurement through to complex programmed measuring sequences with SPC capability and automatic edge detection. The horizontal light beam configuration is ideally suited to large machined or turned workpieces for mounting in vee blocks and centres.
    View Product
  • Sylvac Scan 52 Optical Measuring Machine for Turned Parts
    The Sylvac Scan is the first horizontal machine specially designed for workshop measurement close to the machine tool. The concept is to measure the parts in the same position as they are machined. Suitable for first-off parts, control in process (SPC), sampling or 100% inspection, the Sylvac Scan 52 machines are set to revolutionise control in the workshop. It's this simple: Place the workpiece on the Sylvac Scan 52 machine, press the button and get all of the values automatically and without pre-programing. Perfectly integrated in the workshop, our Sylvac Scan 52 machines replace conventional measuring systems including multi-gauging jigs thanks to their unsurpassed flexibility and time saving. Delivery includes: • Instrument according to technical specifications • 2 male centers • Small diamond coated drive centre • Small rotating (live) centre • Computer • Mouse • Keyboard • Windows multilingual operating system • Screen • Manual • Reflex-Scan Software • Rotary headstock (model 30-902-5521 only)
    View Product
  • Fusion Software
    Fusion metrology software has been the foundation for Baty's camera based inspection systems for the last decade. The combination of ease of use, advanced edge detection and graphical reporting has established this remarkable software as the standard by which other vision packages are measured.
    View Product

Items 1 to 15 of 26 total

per page
Page:
  1. 1
  2. 2